Rosin bag brand- whats your favorite?

[DemonTrich]

Grabbing another dabpress today to squish the full melt bubble hash.

Whats your go-to rosin bags brand? I've been out of the rosin loop for years.

Looking specifically for 25iu to squish bubble hash
Iirc 2x5" bags to fit on the 3x5 platens.

 

[Deebs]

I usually use The Press Club bags (25u), though I have been wanting to try the ones from dabpress, I think they are 37u..

 

[Willie]

Gutenberg bags are excellent. I would be getting 2x4 bags with that platten size. In fact, I need to order some more 160's

 

[Deebs]

You using 160's for flower @Willie?

 

[Willie]

Yup. Just ordered 100 pack from amazon. I have a few others in stock, like 25 and 90 bags but I use the 160's mostly. For hash rosin I'd use the 25's but...........I don't have much luck pressing bubble myself.
That said, what comes from that 160 bag gets put into 510 carts (I rarely dab) And I know all the yada yada about flower rosin in carts but........use Active Ceramic Pro carts and they work well...CCell and PCKT carts are crapola for flower rosin. The cheaper Active carts are not that great either.

I breathe better using carts than smoking this devastating sticky I been growing....now it's one doob a day and unlimited cart hitting and no "hock-toohey's"

 

[jpockets420]

I use these dabpress bags for our 4 ton Dabpress for flower rosin. For dry sift presses I just double the bags up.

 

[BH]

Dabpress 120 flower , using dabpress 10ton press

 

[DemonTrich]

Gutenberg bags are excellent. I would be getting 2x4 bags with that platten size. In fact, I need to order some more 160's

Don't order any. I may have some available when I pick up the dabpress setup tomorrow.

 

[DemonTrich]

25iu is best for pressing bubble or di kief.
Ill have to check my notes. I think for flower, I used a 160iu bag.
I did rosin pressing back in 2016. Sold everything as the market didnt justify making it.

 

[Willie]

they will be here tomorrow It's my "Amazon day", lol

 

[DopeDaniel]

The Lowtemp bags seem to be good quality but what I noticed was a slight size difference, they are a little bigger. I am going to try to use this to my advantage by using a Press club 25 um inner and 90 or 160 low temp outer (depending on what I have). I've struggled getting it in the 2nd bag before.

What temps you planning on pressing at?

 

[DemonTrich]

I have to find my notes. I remember 7g of bubble fits in the 2x4 bags w/o blowouts. Any more, and I had lots of blowouts.

 

[Willie]

The Lowtemp bags seem to be good quality but what I noticed was a slight size difference, they are a little bigger. I am going to try to use this to my advantage by using a Press club 25 um inner and 90 or 160 low temp outer (depending on what I have). I've struggled getting it in the 2nd bag before.

What temps you planning on pressing at?

For double bagging you can use a nylon paint filter material like this Amazon.com: WorkBless 100 Mesh Paint Nylon Mesh Filter Woven Net Sheet Filter Cloth (39"x39") : Tools & Home Improvement

it's pretty cheap and you don't have to worry whether the first bag will fit in the second one

190* F is my press temp generally

 

[DemonTrich]

Boy, when I get a deal, I get a fn deal. Scored a 3x5 6 ton dab press, various bags (about 100), and a 4pc aluminum framed 20"x24" kief sifting set, minus the jack handle. Ill check my garage for something to use.

And did a trade for some product (flower and diamonds).

Ill most likely press all the 120/73 micron bubble hash vs pressing into a temple ball. Scoop up and into a jar to cold cure.

Anyone have a 3d printed release knob for sale or makes them? And if anyone is wanting to trade for these bags, I'm looking for 25iu bags only (2x4" bags if possible)

 

[Chefdave]

Dabpress 25m for bubble, 120 for flower.

 

[DopeDaniel]

45-120 fresh frozen Mac 'n Cheese, air dried (microplane), 25um PC inner/160 LT outer, 150F, 1 min warm up 7 min press.

 

[dirtybanger]

Boy, when I get a deal, I get a fn deal. Scored a 3x5 6 ton dab press, various bags (about 100), and a 4pc aluminum framed 20"x24" kief sifting set, minus the jack handle. Ill check my garage for something to use.

And did a trade for some product (flower and diamonds).

Ill most likely press all the 120/73 micron bubble hash vs pressing into a temple ball. Scoop up and into a jar to cold cure.

Anyone have a 3d printed release knob for sale or makes them? And if anyone is wanting to trade for these bags, I'm looking for 25iu bags only (2x4" bags if possible)

View attachment 237308View attachment 237309View attachment 237310

Make and model for the press? There might be a model floating around.

Harbor Freight 20 Ton Press-Pressure Release Knob by Deifox | Download free STL model | Printables.com

 

[dirtybanger]

Rough print in draft mode. They all look like they use a universal valve knob. This should do.

If the fit is good, I'll slow things down, and use better material.

 

[DemonTrich]

Looks like the spot on the press that this should fit perfectly

 

[DemonTrich]

90% of the dabpress i see used for sale, are all missing the jack handle. How easy is it to not loose a big metal tube?